HP V142 Rack Options Installation Guide

Ground Bonding kit 10

Place an M6 ground washer and an M6 ground nut over the grounding lug on the rack frame, and

then tighten the ground nut.

3. Place the other end of the same grounding strap over the grounding lug on the front door.

4. Place an M6 ground washer and an M6 ground nut over the grounding lug on the front door, and

then tighten the ground nut.

5. Repeat steps 1 through 4 to attach a grounding strap from the rear rack frame to the rear door.

From the rear rack frame to the rack base

1. Place one end of the grounding strap over the grounding lug on the rack frame.

2. Place an M6 ground washer and an M6 ground nut over the grounding lug on the rear rack frame,

and then tighten the ground nut.

3. Place the other end of the same grounding strap over the grounding lug on the rack base.

4. Place an M6 ground washer and an M6 ground nut over the grounding lug on the rack base, and

then tighten the ground nut.

From the rear rack frame to the rack top: