Installation Guide, Fifth Edition - HP 9000 rp8420 Server

Chapter 1
Introduction
Overview
15
The bulk power supply is partitioned through the use of a sealed metallic enclosure located in the bottom of
the server. This enclosure houses the N+1 fully redundant bulk power supplies. These power supplies are
installed from the front of the server after removing the front bezel. The power supply is
2.45 X 5.625 X 20.0 inches.
Figure 1-2 HP 9000 rp8420 server with bezel removed (Front View)
Cell 0
Cell 1
Cell 2
Cell 3
Removable Media
Drive(s)
PCI Power Supplies
Front Fans
Power Switch
Hard Disk Drives
Bulk Power
Supplies