HP 9000 rp8420 Server - User Service Guide, Fifth Edition

Figure 4-14 The ls Command Screen
To return to the MP main menu, enter ma.
To exit the MP, enter x at the MP main menu.
Accessing the Management Processor through a Web Browser
Web browser access is an embedded feature of the MP. The Web browser allows access to the
server through the LAN port on the core I/O card. MP configuration must be done from an ASCII
console.
NOTE: The MP has a separate LAN port from the system LAN port. It requires a separate LAN
drop, IP address, and networking information from that of the port used by HP-UX.
Before starting this procedure, the following information is required:
• IP address for the MP LAN
• Subnet mask
• Gateway address
• Hostname (this is used when messages are logged or printed)
To configure the LAN port for a Web browser, perform the following steps:
1. Connect to the MP using a serial connection.
2. Configure the MP LAN. Refer to “Configuring LAN Information for the MP”.
3. Type CMto enter the Command Menu.
4. Type SA at the MP:CM> prompt to display and set MP remote access.
Accessing the Management Processor through a Web Browser 73