Switch 7700 Configuration Guide, v2

RMON 33
Perform the following configuration in system view.
Adding and Deleting an Entry to or from the History Control Table
The history data management helps you set the history data collection, periodical
data collection and storage of the specified ports. The sampling information
includes the utilization ratio, error counts and total number of packets.
You can use the following commands to add/delete an entry to/from the history
control table.
Perform the following configuration in Ethernet port view.
Adding and Deleting an Entry to or from the Extended RMON Alarm Table
You can use the command to add/delete an entry to/from the extended RMON
alarm table.
Perform the following configuration in system view.
Adding and Deleting an Entry to or from the Statistics Table
The RMON statistics management concerns port usage monitoring and error
statistics when using the ports. The statistics include collision, CRC and queuing,
undersize packets or oversize packets, timeout transmission, fragments,
broadcast, multicast and unicast messages and the usage ratio of bandwidth.
You can use the following commands to add/delete an entry to/from the statistics
table.
Table 60 Add/Delete an Entry to/from the Event Table
Operation Command
Add an entry to the event table. rmon event event-entry [ description string ] { log |
trap trap-community | log-trap log-trapcommunity |
none } [ owner rmon-station ]
Delete an entry from the event
table.
undo rmon event event-entry
Table 61 Add/Delete an Entry to/from the History Control Table
Operation Command
Add an entry to the history control
table.
rmon history entry-number buckets number interval
sampling-interval [ owner text-string ]
Delete an entry from the history
control table.
undo rmon history entry-number
Table 62 Add/Delete an Entry to/from the Extended RMON AlarmTable
Operation Command
Add an entry to the extended
RMON alarm table.
rmon prialarm entry-number alarm-var [ alarm-des ]
sampling-timer { delta | absolute | changeratio }
rising-threshold threshold-value1 event-entry1
falling-threshold threshold-value2 event-entry2
entrytype { forever | cycle cycle-period } [ owner text ]
Delete an entry from the extended
RMON alarm table.
undo rmon prialarm entry-number