Switch 7700 Configuration Guide, v2

BGP 123
Configuring a Route Map for a Peer Group By configuring the route map for
a peer group, the routes coming from the peer group or advertised to the peer
group can be controlled. The route map of advertised routes configured for each
member of a peer group must be same with that of the peer group but their route
maps of coming routes may be different.
By default, no route map is applied on peer group.
Configuring Route Filtering Policy Based on IP ACL for a Peer Group
By default, route filtering based on IP ACL for a peer group is disabled.
Configuring Route Filtering Policy Based on the AS Path List for a Peer
Group
By default, route filtering based on AS path list for a peer group is disabled.
Configuring a Route Filtering Policy Based on an Address Prefix List for a
Peer Group
By default, route filtering based on address prefix list for a peer group is disabled.
Table 96 Configuring a Route Map for a Peer Group
Operation Command
Configure route map for a peer group peer { peer-address | group-name } route-policy
route-policy-name { import | export }
Remove the route map policy of a peer group undo peer { peer-address | group-name }
route-policy policy-name { import | export }
Table 97 Configuring Route Filtering Policy Based on IP ACL for a Peer Group
Operation Command
Configure route filtering policy based on IP
ACL for
a peer group
peer { peer-address | group-name } filter-policy
acl-number { import | export }
Remove the route filtering policy based on IP
ACL of a peer group
undo peer { peer-address | group-name } filter-policy
acl-number { import | export }
Table 98 Configuring Route Filtering Policy Based on the AS Path List for a Peer Group
Operation Command
Configure route filtering policy based on AS
path list for a peer group
peer { peer-address | group-name } as-path-acl
acl-number { import | export }
Remove the route filtering policy based on AS
path list of a peer group
undo peer { peer-address | group-name } as-path-acl
acl-number { import | export }
Table 99 Configuring a Route Filtering Policy Based on an Address Prefix List for a Peer
Group
Operation Command
Configure route filtering policy based on
address prefix list for a peer group
peer { peer-address | group-name } ip-prefix
prefixname { import | export }
Remove the route filtering policy based on
address prefix list of a peer group
undo peer { peer-address | group-name } ip-prefix
prefixname { import | export }