HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array Updating Product Software Guide XCS 6.110 (5697-6782, June 2007)

When to perform: Any time prior to the upgrade
HP Command View EVA 7.0 is required with XCS 6.110. Check the current version and upgrade the
software if necessar y.
Table 8 identifies the upgrade paths to HP Command View EVA 7.0.
Table 8 HP Command View EVA upgrade paths
Current HP Command View
EVA Version
Upgrade Path
HP Command View EVA 5.0 Upgrade to HP Command View EVA 6.0 and then
to 7.0
HP Command View EVA 6.0 Upgrade to HP Command View EVA 7.0
HP Command View EVA 6.0.1 Upgrade to HP Command View EVA 7.0
HP Command View EVA 6.0.2 Upgrade to HP Command View EVA 7.0
For more information on HP Command View EVA, including the H P StorageWorks Comma nd View EVA
installation guide and the release notes, download docum entation from the website listed in "Required
documentation" on page 11.
Upgrading using the typical installation
This procedure is for the typical HP Command View EVA installation. To use the custom installation
procedure
, which provides control over which components are installed, see the HP StorageWorks
Command Vi
ew EVA installation guide for instructions.
To install
the complete software suite:
1. Close all applications running on the management server.
2. Insert the installation CD into the drive.
3. Browse to
the installation CD.
4. Double-click setup.exe to start the installation .
The InstallShield Wizard Welcome window opens.
5. Follow th
e on-screen instructions to complete the installation.
NOTE:
When SMI-S EVA is installed using the typical installation, a default account for the CIM administrator is
created if an administrator account exists on the management server prior to installation. The default
user name and password is admin istrator. If an administrator account does not exist on the management
server prior to installation, the default CIM administrator account is not created during installation. You
must add at least one CIM adm inistrator account to CIMOM after completing the installation. See
“Managing users in SMI-S EVA” in the HP Com m and View EVA installation guide for more information.
A trust relationship between HP Command View EVA and SMI-S EVA is established automatically when
youinstallSMI-SEVA.Asaresult,HPCommandViewEVAacceptsallSMI-SEVAqueries.
Verifying the installation
To verif y that the software was installed s uccessfully:
1. Ensure that:
• The software icons for HP Command View EVA
, HP Command View EVAPerf ,and/orHP
Storage System Scripting Utilit y
appear on the desktop.
34
Pre-upgrade tasks