HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array hardware configuration guide (5697-7338, February 2008)

Table 27 Center of gravity measurements — 42U low-voltage cabinet
Me asurem ent
Inches
Depth from mounting face of vertical m ounting rails
16.56
Height from inside base
37 .09
Distance from cabinet center (viewing front of cabinet) 0.46 (left of center line)
Table 28 Center of gravity measurements — 36U low-voltage cabinet
Me asurem ent
Inches
Depth from mounting face of vertical m ounting rails
NA
Height from inside baseNA
NA
Distance from cabinet center (viewing front of cabinet)
NA
Tip stability
The system must pass tip stability testing for a 10° tip test and 250N side-force tip test per
CAN/CSA-C22.2 No. 60950-00/3rd Edition, Safety of Information Technology Equipment.
Results of tip and tilt calculations show that the testing of this configuration is not necessary. Center of
gravity locations, within the 10° boundaries show no danger of tip. Force tip testing calculations indicate
that the rear force tip test need not be performed.
62
Low-voltage Japanese cabinets