8x00 Enterprise Virtual Array hardware configuration guide (5697-7338, February 2008)

B L ow-voltage Japanese ca binets

General description

This speciﬁcation describes HP's requirements for low voltage EVA storage cabinets. These low voltage

cabinets are conﬁgured with two redundant sets of PDUs in order to provide system required power. Each

PDU set is limited to 2550 W at a minimum voltage of 108. Each PDU is limited to one power strip

to limit the number of EVA component attachment to eight components per power PDU. Power strip

additions will likely overload the PDU systems.

Reference documents

Reference documents are for informational purposes only. No requirement is implied by the inclusion

or exclusio

n of reference documents.

• ANSI/EIA-310-D-1992, Cabinets, Racks, Panels a nd Associated Equipment

• EN60950:2000, Safety of Information Technology Equipment

• FCC Part 15

Code of Federal Regulations, Title 47, FCC Part 15 Radio Frequency Devices,

Subpart B, Unintentional Radiators

• EN55022 (1 998) , Limits and Metho ds of Measurement of Radio Interference Characteristics of

Informati

on Technology Equipment

• EN55024 (1998), Information Technology Equipment – Immunit y Characteristics and M ethods

of Measu rement

• EN61000, Electromagnetic Compatibility

• CAN/CSA

-C22.2 No. 60950-00/3rd Edition, Safety of Information Technology Equipment

All bran

ds, names, trademarks and logos are the property of their respective owners.

Power conﬁgurations

There are two power conﬁgurations: the AD572A and the AD573A. The AD572A uses the HP

StorageWorks 42 U Low-voltage cabinet (Figure 35) and the AD573A uses the HP StorageWorks 36U

Low-voltage cabinet (Figure 36).

4x00/6x00/8x00 Enterprise Virtual Array hardware conﬁguration guide