HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array hardware configuration guide (5697-7338, February 2008)

Table 23 EVA8x00 power spec ifications — 208 Volts
Specification
2C2D 2C6D 2C8D 2C10D 2C12D
Total System
Wattage
1153 2660
3414 416 7 4920
Total System
BTU/hour
3936 90 77
11648 14218
16789
Input Current
(A) - Typical
per system
2.9 6.7 8.5 10.4 12.3
Typical
1
In Rush Current
(A)
13 2 2 80 363 451 5 28
Failover Mode
Input Current
(A) - Maximum
per system
4.9
11.3
14.5
17.7
20.8
1
Typical is described as a system in normal steady state operation (that is, both PDUs operating normally, the array
reading/writing to disk drives in a production environment).
This data represents fully populated drive enclosures with 15K RPM disk drives. Other drive types m ay vary slightly. For example, if
you are using 10K RPM drives, the power specifications will be approximately 20% less than the 15K RPM drives.
Table 24 EVA8x00 power s pecifications — 230 Volts
Specificati
on
2C2D 2C6D 2C8D 2C10D 2C12D
Total System
Wattage
1153 2660 3414 4167 492 0
Total System
BTU/hour
3936 90 77
11648 14218
16789
Input Current
(A) - Typical
per system
2.7 6.3 8.1 9.8 11.6
Typical
1
In Rush Current
(A)
147
311
403
500 586
Failover Mode
Input Current
(A) - Maximum
per system
4.6
10.6 13.7 16.7 19.7
1
Typical is described as a system in normal steady state operation (that is, both PDUs operating normally, the array
reading/writing to disk drives in a production environment).
This data represents fully populated d rive enclosures with 15K RPM disk drives. Other drive types may vary slightly.
4x00/6x00/8x00 Enterprise Virtual Array hardware configuration guide
57