HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array hardware configuration guide (5697-7338, February 2008)

4 EVA4x00 configura tions
This chapter briefly discusses the standard EVA4x 00 config urations. Each section describes the placement
of HSV controllers, drive enclosures, enclosure address bus shelf ID expansion cables, and copper
Fibre Channel cables.
NOTE:
The configurations described in this guide are the preferred configurations. Other configurations may be
used, but ensure that enclosure ID 7 is not used for any disk enclosure.
2C1D configuration
The 2C1D configuration provides a maximum storage capacity of 4.2 TB. This c on figuration can contain
a maximum of 14 disks. This configuration is available in a 42U, 41U, 36U, 33U, 25U, or 22U rack and
has two HSV200-A/B controllers and one drive enclosure.
Figure 27 2C1D configuration
1. 3U blank
2. HSV200-A/B controller pair
3. Drive enclosure
The 2C1D cable routing diagram is located in Figure 28.
4x00/6x00/8x00 Enterprise Virtual Array hardware configuration guide
43