EMULEX EZPilot EVA Version 2.0 User Manual (5697-6961, July 2007)

EZPilot - Management Section Page 30
Viewing an HBA’s Firmware Information
Use the Maintenance tab to view a selected HBA’s firmware information, update its firmware and enable
or disable its BootBIOS.
Figure 24: The EZPilot HBA Maintenance tab (Host View) in Advanced Mode
The Firmware area of the Maintenance tab displays the following information:
• Current Firmware Version - The Emulex firmware version number for the selected HBA.
• Operational Firmware Name - If visible, the name of the firmware that is operational.
• Initial Firmware - The version of the firmware stub responsible for installing the SLI code into its
proper slot.
• SLI-1 Firmware Name - The name and version of SLI-1 firmware installed in the selected
adapter.
• SLI-2 Firmware Name - The name and version of SLI-2 firmware installed in the selected
adapter.
• SLI-3 Firmware Name - The name and version of SLI-3 firmware installed in the selected
adapter.
• Kernel Version - The version of the firmware responsible for starting the driver.
The BootBIOS area of the Maintenance tab displays the following information:
• BootBIOS - The BootBIOS version running on the selected HBA. If BootBIOS is not present on
the HBA, the field displays the word “Disabled”.
The Maintenance tab buttons
• Update Firmware - Click this button to update firmware/BIOS on the selected HBA. See
“Updating Firmware or BIOS on an HBA” on page 31 for instructions.
Note: You must select Advanced Mode from the View menu to see the Maintenance tab for
a selected HBA.