H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches QuickTools User Guide Firmware Version 9.0.7

Managing H3C LSW1FC4P0 Interface Card

Configuring an H3C LSW1FC4P0 Interface Card

38 59273-00 C

Table 2-8 describes the Network Properties DNS values.

Table 2-8. Network Properties—DNS Configuration

Parameter Description

DNS Client Domain Name Service client

Local Hostname The name of local host

Server Discovery Choose one of the following methods by which to assign the IP address:

 Static

— uses the IP configuration parameters entered in the Network

Properties dialog.

 DHCP (Dynamic Host Configuration Protocol)

— acquires the IP configura-

tion from a DHCP server. If no satisfactory lease is obtained, the DHCP cli-

ent attempts to use the previously configured lease. If the previous lease

cannot be used, no IP address will be assigned to this switch in order to

avoid an IP address conflict.

 Dhcpv6 (Dynamic Host Configuration Protocol version 6)

— acquires the IP

configuration from a DHCP server. If no satisfactory lease is obtained, the

DHCP client attempts to use the previously configured lease. If the previous

lease cannot be used, no IP address will be assigned to this switch in order

to avoid an IP address conflict.

DNS Server Addresses The IP address of the DNS server

Search List Discovery Choose one of the following methods by which to assign the IP address: