H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches QuickTools User Guide Firmware Version 9.0.7

Managing H3C LSW1FC4P0 Interface Card
Displaying Interface Card Information
16 59273-00 C
SNMP v3 Security Enabled SNMP v3 Security enabled or disabled
Broadcast Support N/A - does not apply to this switch
NTP Client Enabled Enabled or disabled. Allows for switches to synchronize
their time to a centralized server.
NTP Server Address The IP address of the centralized NTP server. Ethernet
connection to NTP server is required.
Use Front Port N/A - does not apply to this switch
DNS Enabled DNS Enabled status
Configured Local Host-
name
Hostname for the switch. If a fully qualified domain name
is given, the domain suffix is used as the first suffix in the
DNS search list for DNS lookups performed by the switch.
Assigned Hostname Hostname assigned to the switch.
IPv6 Assigned Address
(1-20)
The set of IPv6 addresses assigned by DHCPv6, NDP, or
the switch administrator.
User Login Group
User Name Account name
Login Level Authority level
Super User Super user privileges enabled/disabled
UserAuthentication
Enabled
Enforcement of account names and authority (always
True)
Firmware Group
Firmware Version Active firmware version
Inactive Firmware Version N/A - does not apply to this switch
Pending Firmware Version Firmware version that will be activated at the next reset
PROM/Boot Version PROM firmware version
Services Group
NTP Client Enabled Enabled or disabled. Allows for the H3C LSW1FC4P0
Interface Card to synchronize time to a centralized server.
NTP Server Address The IP address of the centralized NTP server. Ethernet
connection to NTP server is required.
Table 2-3. Switch Data Window Entries (Continued)
Entry Description