H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches QuickTools User Guide Firmware Version 9.0.7

Managing H3C LSW1FC4P0 Interface Card
Displaying Interface Card Information
14 59273-00 C
Switchover Timestamp N/A - does not apply to this switch
Number of Switchovers N/A - does not apply to this switch
Number of Ports Number of ports activated on the H3C LSW1FC4P0 Inter-
face Card
Operational State Switch operational state: Online, Offline, Diagnostic,
Down
Administrative State Current H3C LSW1FC4P0 Interface Card administrative
state
Configured Admin State Switch administrative state that is stored in the H3C
LSW1FC4P0 Interface Card configuration
Beacon Status Switch LEDs are blinking (On) or not (off).
Require Enode Mac Config MAC-address checking status on the switch. When
enabled, MAC-address checking ensures that each FCF
responds to one and only one CNA.
Status Group
Operational State Switch operational state: Online, Offline, Diagnostic,
Down
Administrative State Current H3C LSW1FC4P0 Interface Card administrative
state
Configured Admin State Switch administrative state that is stored in the H3C
LSW1FC4P0 Interface Card configuration
Beacon Status Switch LEDs are blinking (On) or not (off).
Reason for Status The reason for the operational state.
Secondary CPU Status N/A - does not apply to this switch
Fan 1 Status N/A - does not apply to this switch
Fan 2 Status N/A - does not apply to this switch
Fan 3 Status N/A - does not apply to this switch
Power Supply 1 Status N/A - does not apply to this switch
Power Supply 2 Status N/A - does not apply to this switch
Table 2-3. Switch Data Window Entries (Continued)
Entry Description