H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Installation Manual

9
• Operational and environmental statistics
• Online help
Refer to the H3C LSW1FC4P0 Interface Card for S5820X-28C
Ethernet Switches QuickTools User Guide for more information.
Command Line Interface
The command line interface (CLI) provides monitoring and
configuration functions by which the administrator can manage the
LSW1FC4P0 Card. The CLI is available over the Ethernet
management port connection or through the S5820X Ethernet
switch (see page 20). Refer to the H3C LSW1FC4P0 Interface
Card for S5820X-28C Ethernet Switches Command Line Interface
Guide for more information.
Simple Network Management Protocol
SNMP provides monitoring and trap functions for the fabric. The
LSW1FC4P0 card firmware supports SNMP versions 1, 2, and 3,
the Fibre Alliance Management Information Base (FA-MIB) version
4.0, and the Fabric Element Management Information Base (FE-
MIB) RFC 2837. Traps can be formatted using SNMP version 1 or
2. For information about adding, editing, or removing SNMP
version 3 users, refer to the H3C LSW1FC4P0 Interface Card for
S5820X-28C Ethernet Switches QuickTools User Guide or the H3C
LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches
Command Line Interface Guide.
Storage Management Initiative–Specification
(SMI-S)
SMI-S provides for the management of the LSW1FC4P0 Card
through third-party applications that use SMI-S.