H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Installation Manual

2. Enter your choice for the file transfer protocol with which to

download the firmware image file. FTP requires a user account

and a password; TFTP does not.

FTP or TFTP : ftp

3. Enter your account name on the remote host (FTP only) and the

IP address of the remote host. When prompted for the source

file name, enter the path for the firmware image file.

User Account : johndoe

IP Address : 10.0.0.254

Source Filename : 9.0.xx.xx_flcn

About to install image. Do you want to continue?

[y/n] y

4. When prompted to install the new firmware, enter Yes to

continue or No to cancel. Entering Yes will disrupt traffic. This

is the last opportunity to cancel.

About to install image. Do you want to continue?

[y/n] y

Connected to 10.20.20.200 (10.20.20.200).

220 localhost.localdomain FTP server (Version wu-

2.6.1-18)

ready.

5. Enter the password for your account name (FTP only).

331 Password required for johndoe.

Password:******

230 User johndoe logged in.

6. The firmware will now be downloaded from the remote host to

the interface card, installed, and activated.