H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Installation Manual

20
Managing the LSW1FC4P0 Card through the
S5820-28C Ethernet Switch
Enter the following command in user view in the switch CLI to open
the LSW1FC4P0 card CLI:
oap connect slot slot-number system system-name
You can now enter LSW1FC4P0 CLI commands. To return to the
Ethernet switch CLI, press Ctrl+k.
Cabling Devices to the LSW1FC4P0 Card
Connect cables to the SFP transceivers and their corresponding
devices, and then energize the devices. Device host bus adapters
can have SFP (or SFF) transceivers. LC-type duplex fiber optic
cable connectors are designed for SFP transceivers. Duplex cable
connectors are keyed to ensure proper orientation. Choose the
fiber optic cable with the connector combination that matches the
device adapter.