H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Installation Manual

19
PrimaryTFPortMap [0,1,2,3 ]0,2,3
H3C (admin-config) #> set config port 7
.
.
.
PrimaryTFPortMap [0,1,2,3 ]0,2,3
3. Enter the Set Config Port command for the flex port (Ext2:1)
and the corresponding internal port (Int2:5) and change the
PortType to PT.
H3C (admin-config) #> set config port 1
.
.
.
PortType (PT,TF) [TF ] PT
H3C (admin-config) #> set config port 5
.
.
.
PortType (PT,TH) [TH ] PT
4. Enter the Config Save and Config Activate commands to save
and activate the new configuration. Refer to the H3C
LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches
Command Line Interface Guide for more information.
H3C (admin-config) #> config save
H3C (admin) #> config activate
If the flex port is not connected to the Ethernet, the corresponding
internal port will change state to Down. The internal port will return
to Online when the flex port is connected.