H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Installation Manual

For a Windows workstation, do the following:

1. Click the Start button and choose Settings>Control

Panel>Network and Dial-Up Connections.

2. Choose Make New Connection.

3. Click the Connect to a private network through the Internet

radio button, then click the Next button.

4. Enter 10.0.0.253 for the IP address.

For a Linux or Solaris workstation, open a command window and

enter the following command where (interface) is your interface

name:

ifconfig (interface) ipaddress 10.0.0.253 netmask

255.255.255.0 up

For a Mac OS X workstation, do the following:

1. Choose System Preferences>System Preferences>Network.

2. Double-click your network adapter.

3. In the configuration dialog, select Manually from the Configure

IPv4 drop down menu.

4. Enter 10.0.0.253 in the IP Address field.

5. Enter 255.255.255.0 in the Subnet Mask field.

6. Click Apply Now.

Connecting the Workstation to the

LSW1FC4P0 Card

You can manage the switch using the CLI or QuickTools over an

Ethernet connection to the interface card. Connect the

management workstation to the interface card in one of the

following ways: