H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Switch Module Configuration
Displaying Switch Module Information
60 59272-00 C
Elapsed Time Between Resets
The Uptime command displays the elapsed time since the Switch Module was last
reset and the reset method. A hot reset or non-disruptive firmware activation does
not reset the elapsed time reported by this command. The following example
displays the time since the last reset.
H3C #> uptime
Elapsed up time : 0 day(s), 2 hour(s), 28 min(s), 44 sec(s)
Reason last reset: NormalReset
Configuration Information
Enter the Show Config Switch command to display the Switch Module
configuration parameters. These parameters determine the operational
characteristics of the Switch Module. Refer to Table 19 for a description these
parameters.
H3C #> show config switch
Configuration Name: default
-------------------
Switch Configuration Information
--------------------------------
AdminState Online
SymbolicName H3C
ConfigDescription Default Config
ConfigLastSavedBy admin@OB-session7
ConfigLastSavedOn Wed Mar 31 13:11:08 2010