H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Switch Module Configuration
Displaying Switch Module Information
59272-00 C 59
System Process Information
The Ps command displays system process information to help you determine
what processes are running and CPU usage. The following example displays
current system processes.
H3C #> ps
PID PPID %CPU %MEM TIME ELAPSED COMMAND
241 216 0.1 8.8 00:00:00 01:37 cns
242 216 0.2 8.8 00:00:00 01:37 ens
243 216 0.1 8.8 00:00:00 01:37 dlog
244 216 3.1 9.1 00:00:03 01:37 ds
245 216 2.0 11.8 00:00:02 01:37 mgmtApp
246 216 0.1 8.8 00:00:00 01:37 sys2swlog
254 216 2.5 9.1 00:00:02 01:36 diagAgent
283 216 0.1 8.9 00:00:00 01:31 fc2
284 216 0.2 9.1 00:00:00 01:31 nserver
285 216 0.6 9.3 00:00:00 01:31 PortApp
286 216 0.3 9.1 00:00:00 01:31 qfsApp
287 216 0.2 9.0 00:00:00 01:31 mserver
288 216 0.3 9.1 00:00:00 01:31 eport
289 216 0.2 9.1 00:00:00 01:31 zoning
314 231 0.0 9.1 00:08:47 00:18 dcbxApp
315 231 0.0 9.1 00:00:25 00:18 phymon
370 216 0.8 9.0 00:00:00 01:28 snmpservicepath
387 216 0.3 9.1 00:00:00 01:27 util
388 216 0.3 8.9 00:00:00 01:27 port_mon
389 216 0.2 8.9 00:00:00 01:27 diagExec
511 509 0.0 0.1 00:00:00 00:14 vsftpd
371 216 0.5 1.0 00:00:00 01:27 snmpd
372 216 0.5 0.9 00:00:00 01:27 snmpmain
The column titles are as follows:
 PID–Process identifier
 PPID–Parent process identifier
 %CPU–Percentage CPU usage
 TIME–Actual processing time
 ELAPSED–Elapsed time since the process started
 COMMAND–The command that initiated the process.