H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Network and Fabric Configuration
Managing IP Security
59272-00 C 55
Resetting the IP Security Configuration
Resetting the IP Security configuration deletes all policies and associations from
the switch. There are two ways to do this. Within an Ipsec Edit session, enter the
Ipsec Clear command, then save the changes as shown in the following example:
H3C #> admin start
H3C (admin) #> ipsec edit
H3C (admin-ipsec) #> ipsec clear
H3C (admin-ipsec) #> ipsec save
The IPsec configuration will be saved and activated.
Please confirm (y/n): [n] y
The Reset Ipsec command deletes all polices and associations from the switch,
but does not require an Ipsec Edit session.
H3C #> admin start
H3C (admin) #> reset ipsec
The IPsec configuration will be reset and the default values activated.
Please confirm (y/n): [n] y
Reset and activation in progress ....