H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Network and Fabric Configuration
Managing IP Security
54 59272-00 C
3=null (0 byte key)
4=blowfish-cbc (5-56 byte key)
5=aes-cbc (16/24/32 byte key)
6=twofish-cbc (32 byte key)
encryption algorithm choice :
*EncryptionKey (quoted string or raw hex bytes) :
The security association has been edited.
This configuration must be saved with the 'ipsec save' command
before it can take effect, or to discard this configuration
use the 'ipsec cancel' command.
H3C (admin-ipsec) #> ipsec save
The IPsec configuration will be saved and activated.
Please confirm (y/n): [n] y
Renaming a User-Defined Association
To rename a user-defined association (association_1), enter the
Ipsec Association Rename command as shown in the following example:
H3C #> admin start
H3C (admin) #> ipsec edit
H3C (admin-ipsec) #> ipsec association rename association_1 association_4
The security association will be renamed. Please confirm (y/n): [n] y
H3C (admin-ipsec) #> ipsec save
The IPsec configuration will be saved and activated.
Please confirm (y/n): [n] y
Copying an Association
You can copy both user-defined and dynamic associations. To copy an
association (association_1), enter the Ipsec Association Copy command as
shown in the following example:
H3C #> admin start
H3C (admin) #> ipsec edit
H3C (admin-ipsec) #> ipsec association copy association_1 association_a
H3C (admin-ipsec) #> ipsec save
The IPsec configuration will be saved and activated.
Please confirm (y/n): [n] y