H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Network and Fabric Configuration
Configuring Fibre Channel over Ethernet
59272-00 C 31
5. Save and activate the Switch Module A configuration.
H3C (admin-config) #> config save
H3C (admin) #> config activate
To configure Switch Module B:
1. Open a Config Edit session.
H3C #> admin start
H3C (admin) #> config edit
2. Create a VLAN and an FCF, and assign the VLAN to the FCF.
H3C (admin-config) #> fcf 0efc01 create
H3C (admin-config) #> fcf 0efc01 add vlan 1002
3. Assign internal ports to VLAN 1002. Because all internal ports (4–7) are
assigned to VLAN 1002 by default, no further configuration is needed.