H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Test Status
59272-00 C 299
Test Status
Displays the status of a test in progress, or if there is no test in progress, the
status of the test that was executed last.
Authority None
Syntax test status
port [port_number]
switch
Keywords port [port_number]
Display test status for the port given by [port_number]. [port_number] can be 0–7.
switch
Display test status for the switch: Passed, Failed, NeverRun.
Examples The following is an example of the Test Status Port command:
H3C #> test status port 1
Port Test Test Loop Test
Num Port Type Status Count Failures
---- -------- ---- ------ ----- --------
1 1 Offline Internal Passed 12 0
The following is an example of the Test Status Switch command:
H3C #> test status switch
Test Test Test Loop Test
Level Type Status Count Failures
----- ---- ------ ----- --------
Switch Offline Passed 3 0
Port Test Test Loop Test
Num Type Status Count Failures
---- ---- ------ ----- --------
0 Offline Passed 3 0
1 Offline Passed 3 0
2 Offline Passed 3 0
3 Offline NeverRun 0 0
4 Offline Passed 3 0
5 Offline NeverRun 0 0
6 Offline NeverRun 0 0
7 Offline NeverRun 0 0