H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Test Port
298 59272-00 C
To display the status of the most recent port test or port test in progress, enter the
Test Status Port command.
Examples The following is an example of an internal test on port 1.
H3C #> admin start
H3C (admin) #> set port 1 state diagnostics
H3C (admin) #> test port 1 offline internal
A list of attributes with formatting and current values will follow. Enter a new
value or simply press the ENTER key to accept the default value. If you wish to
terminate this process before reaching the end of the list press 'q' or 'Q' and
the ENTER key to do so.
LoopCount (decimal value, 1-4294967295) [100 ]
FrameSize (decimal value, 40-2148) [256 ]
DataPattern (32-bit hex value or 'Default') [Default ]
StopOnError (True / False) [True ]
LoopForever (True / False) [False ]
Do you want to start the test? (y/n) [n] y
The test has been started.
A notification with the test result(s) will appear
on the screen when the test has completed.
H3C (admin) #>
Test for port 1 Passed.
When the test is complete, remember to place the port back online.
H3C (admin) #> set port 1 state online