H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Show Voltage
292 59272-00 C
Show Voltage
Displays voltage information from the Switch Module voltage sensors.
Authority None
Syntax show voltage
Examples The following is an example of the Show Voltage command:
H3C #> show voltage
Voltage Sensors:
Sensor Description Status Current Low Alarm High Alarm
------ ----------- ------ ------- --------- ----------
0 1.5V Good 1.50 1.31 1.68
1 1.25V Good 1.24 1.00 1.50
2 2.5V Good 2.48 2.20 2.82
3 3.3V Good 3.28 2.99 3.62
4 12V Good 11.44 10.00 13.31
5 1.2V Good 1.19 1.04 1.38
6 1.8V Good 1.80 1.61 1.99
7 1.25V_VREF Good 1.24 1.00 1.50
8 2.5V_ANALOG Good 2.39 2.10 2.82