H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Show Version
59272-00 C 291
Examples The following is an example of the Show Version command.
H3C #> show version
*****************************************************
* *
* Command Line Interface SHell (CLISH) *
* *
*****************************************************
SystemDescription 4-port FC media card
HostName <undefined>
EthIPv4NetworkAddr 10.20.125.36
EthIPv6NetworkAddr fe80::2c0:ddff:fe01:6eb3
MACAddress 00:c0:dd:01:6e:b3
WorldWideName 10:00:00:c0:dd:01:6e:b3
SerialNumber 0951E00023
SymbolicName H3C
ActiveSWVersion V9.0.7.x.x
ActiveTimestamp day mon date hh:mm:ss yyyy
POSTStatus Passed
SwitchMode Transparent
This switch supports a dual-stacked IPv4 and IPv6 network connection.
Use the 'set setup system' command to change the network settings.
Either IPv4 or IPv6 can be disabled, otherwise the switch will run in
dual-stack mode.