H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Show Switch
282 59272-00 C
Show Switch
Displays Switch Module operational information.
Authority None
Syntax show switch
Notes Table 36 describes the Switch Module operational parameters.
Table 36. Switch Module Operational Parameters
Parameter Description
SymbolicName Descriptive name for the Switch Module
SwitchWWN Switch Module world wide name
BootVersion PROM boot version
CreditPool Number of port buffer credits available to recipient
ports
FirstPortAddress FC address of Switch Module port 0
FlashSize - MBytes Size of the flash memory in megabytes
LogFilterLevel Event severity level used to record events in the
event log
MaxPorts Number of ports available on the Switch Module
NumberOfResets Number of times the Switch Module has been
reset over its service life
ReasonForLastReset Action that caused the last reset
ActiveImageVersion - build date Active firmware image version and build date.
PendingImageVersion - build date Firmware image version and build date that is
pending. This image will become active at the next
reset or power cycle.
ActiveConfiguration Name of the Switch Module configuration that is in
use.
AdminState Switch Module administrative state
AdminModeActive Admin session status
BeaconOnStatus Beacon status as set by the Set Beacon com-
mand.
OperationalState Switch Module operational state