H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Show Port
59272-00 C 271
Examples The following is an example of the Show Port command:
H3C #> show port
Fibre Channel / Passthrough Ethernet
Admin Operational Login Config Running Link Link
Port State State Status Type Type State Speed
---- ----- ----------- ------ ------ ------- ----- -----
Ext1:0 Online Offline NotLoggedIn TF TF Inactive 2Gb/s
Ext2:1 Online Offline NotLoggedIn TF TF Inactive 2Gb/s
Ext3:2 Online Offline NotLoggedIn TF TF Inactive 2Gb/s
Ext4:3 Online Offline NotLoggedIn TF TF Inactive 2Gb/s
Ethernet
Admin Operational Config Link Link
Port State State Type State Speed MACAddress
---- ----- ----------- ------ ----- ----- ----------
Int1:4 Online Offline TH Active 10Gb/s 00:c0:dd:01:6e:b4
Int2:5 Online Offline TH Active 10Gb/s 00:c0:dd:01:6e:b5
Int3:6 Online Offline TH Active 10Gb/s 00:c0:dd:01:6e:b6
Int4:7 Online Offline TH Active 10Gb/s 00:c0:dd:01:6e:b7