H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Show Port
59272-00 C 269
LIP_F8_AL_PS This LIP denotes a loop failure detected by the L_Port identi-
fied by AL_PS.
LIP_F7_F7 A loop initialization primitive frame used to acquire a valid
AL_PA.
LIP_F8_F7 A loop initialization primitive frame used to indicate that a loop
failure has been detected at the receiver.
Login Number of device logins
LoginStatus Login status
Logout Number of device logouts
LongFramesIn Number of incidents when one or more frames are received
that are greater than the maximum size.
LoopTimeouts A two (2) second timeout as specified by FC-AL-2.
LossOfSync Number of synchronization losses (>100 ms) detected by this
port. A loss of synchronization is detected by receipt of an
invalid transmission word.
LostFrames Number of incidents of lost frames.
Lost RRDYs Number of incidents of lost R_RDYs.
MaxCredit Maximum number of port buffer credits
MediaSpeeds Possible transmission speeds
MediaPartNumber Transceiver vendor part number
MediaRevision Transceiver revision
MediaType Media physical variant. The variant indicates speed, media,
transmitter, and distance. The media designator may be M5
(multimode 50 micron), M6 (multimode 62.5 micron), or MX.
MX indicates that the media supports both multimode 50 and
62.5 micron.
MediaVendor Transceiver manufacturer
MediaVendorID Transceiver manufacturer identifier
OperationalState Operational state
PerfTuningMode AutoPerfTuning status
PortID Fibre Channel port address
Table 35. Show Port Parameters (Continued)
Entry Description