H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Show Perf
59272-00 C 265
frame [port_list]
Displays continuous performance data in total frames/second transmitted and
received for the ports given by [port_list]. [port_list] can be a set of port numbers
and ranges delimited by spaces. If you omit [port_list], the command displays
performance data for all ports. Press any key to stop the display.
inframe [port_list]
Displays continuous performance data in frames/second received for the ports
given by [port_list]. [port_list] can be a set of port numbers and ranges delimited
by spaces. If you omit [port_list], the command displays performance data for all
ports. Press any key to stop the display.
outframe [port_list]
Displays continuous performance data in frames/second transmitted for the ports
given by [port_list]. [port_list] can be a set of port numbers and ranges delimited
by spaces. If you omit [port_list], the command displays performance data for all
ports. Press any key to stop the display.
errors [port_list]
Displays continuous error counts for the ports given by [port_list]. [port_list] can be
a set of port numbers and ranges delimited by spaces. If you omit [port_list], the
command displays performance data for all ports. Press any key to stop the
display.
Examples The following is an example of the Show Perf command:
H3C #> show perf
Bytes/s Bytes/s Bytes/s Frames/s Frames/s Frames/s
Port (in) (out) (total) (in) (out) (total)
---- ------- ------- ------- -------- -------- --------
Ext1:0 116 116 232 1 1 2
Ext2:1 116 116 232 1 1 2
Ext3:2 116 116 232 1 1 2
Ext4:3 116 116 232 1 1 2
Int1:4 0 0 0 0 0 0
Int2:5 0 0 0 0 0 0
Int3:6 0 0 0 0 0 0
Int4:7 0 0 0 0 0 0