H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Show Log
260 59272-00 C
Warning
Displays all warning events.
Critical
Displays all critical events.
Port [port_number]
Displays all events related to the port given by [port_number].
SNMP
Displays all events related to SNMP.
Switch
Displays all events related to
Switch Module management.
level
Displays the event severity level logging setting and the display level setting.
options
Displays the options that are available for configuring event logging and automatic
display to the screen. Refer to the “Set Log” command on page 11-210 for
information about how to configure event logging and display level.
port
Displays the ports being monitored for events. If an event occurs which is of the
defined level and on a defined component, but not on a defined port, no entry is
made in the log.
settings
Displays the current filter settings for component, severity level, port, and display
level. This command is equivalent to executing the following commands
separately: Show Log Component, Show Log Level, and Show Log Port.
Examples The following is an example of the Show Log Component command:
H3C #> show log component
Current settings for log
------------------------
FilterComponent Switch Port Snmp CLI