H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Show Env
59272-00 C 253
Show Env
Displays temperature and voltage information for Switch Module.
Authority None
Syntax show env
Examples The following is an example of the Show Env command:
H3C #> show env
Temperature(C) Sensors:
Sensor Description Status Current High Warn High Alarm
------ ----------- ------ ------- --------- ----------
0 BOARD Normal 34 75 81
1 DS1780 Normal 39 n/a n/a
2 MAX1617 Normal 30 75 80
3 ASIC Normal 57 102 105
Voltage Sensors:
Sensor Description Status Current Low Alarm High Alarm
------ ----------- ------ ------- --------- ----------
0 1.5V Good 1.50 1.31 1.68
1 1.25V Good 1.24 1.00 1.50
2 2.5V Good 2.49 2.20 2.82
3 3.3V Good 3.31 2.99 3.62
4 12V Good 11.88 10.00 13.31
5 1.2V Good 1.19 1.04 1.38
6 1.8V Good 1.80 1.61 1.99
7 1.25V_VREF Good 1.24 1.00 1.50
8 2.5V_ANALOG Good 2.39 2.10 2.82