H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Show Alarm
248 59272-00 C
Show Alarm
Displays the alarm log and session output stream display setting.
Authority None
Syntax show alarm
settings
Keywords settings
Displays the status of the parameter that controls the display of alarms in the
session output stream. This parameter is set using the Set Alarm command.
Notes The alarm log is cleared when the Switch Module is reset or power cycled.
Examples The following is an example of the Show Alarm Settings command:
H3C #> show alarm settings
Current settings for alarm
--------------------------
display ON