H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Set Setup System
59272-00 C 233
Set Setup System
Configures the network, logging, NTP server, and timer configurations on the
Switch Module.
Authority Admin session
Syntax set setup system
dns
ipv4
ipv6
logging
ntp
timers
Keywords dns
Prompts you in a line-by-line fashion to DNS host name configuration settings
described in Table 27. To configure all system parameters, omit the keyword. For
each parameter, enter a new value or press the Enter key to accept the current
value.
Table 27. DNS Host Name Configuration Parameters
Parameter Description
DNSClientEnabled Enables (True) or disables (False) the DNS client.
DNSLocalHostname Name of local DNS server
DNSServerDiscovery DNS server boot method: 1 – Static, 2 – DHCP,
3 – DHCP version 6. The default is 1 – Static.
DNSServer1Address
DNSServer2Address
DNSServer3Address
IP addresses of up to three DNS servers.
DNSSearchListDiscovery DNS search list discovery method:
 Static
DNSSearchList1
DNSSearchList2
DNSSearchList3
DNSSearchList4
DNSSearchList5
A suffix that is appended to unqualified host names to
extend the DNS search. You can specify up to five
searchlists (or suffixes).