H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Set Setup Services
226 59272-00 C
Set Setup Services
Configures services on the Switch Module.
Authority Admin session
Syntax set setup services
Prompts you in a line-by-line fashion to enable or disable
Switch Module services.
Table 24 describes the
Switch Module service parameters. For each parameter,
enter a new value or press the Enter key to accept the current value shown in
brackets.
NOTE:
Use caution when disabling TelnetEnabled and GUIMgmtEnabled; it is
possible to disable all Ethernet access to the
Switch Module.
Table 24. Switch Module Services Settings
Entry Description
TelnetEnabled Enables (True) or disables (False) the ability to manage
the Switch Module over a Telnet connection. Disabling this
service is not recommended. The default is True.
SSHEnabled Enables (True) or disables (False) Secure Shell (SSH)
connections to the Switch Module. SSH secures the
remote connection to the Switch Module. To establish a
secure remote connection, your workstation must use an
SSH client. The default is False.
GUIMgmtEnabled Enables (True) or disables (False) out-of-band manage-
ment of the Switch Module with SNMP and SMI-S. The
default is True.