H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Set Beacon
59272-00 C 201
Set Beacon
Illuminates the port LEDs for the purpose of locating a Switch Module or testing
LEDs
. When the beacon is on, the Logged-In LEDs flash, and the Activity LEDs
are lit continuously.
Authority None
Syntax set beacon [state]
Keywords [state]
[state] can be one of the following:
on
Enables the beacon.
off
Disables the beacon.
Examples The following is an example of the Set Beacon command:
H3C #> set beacon on