H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Reset
192 59272-00 C
Reset
Resets the Switch Module configuration parameters. If you omit the keyword, the
default is Reset Switch.
Authority Admin session
Syntax reset
callhome
config [config_name]
factory
ipsec
port [port_list]
radius
services
snmp
switch (default)
system
Keywords callhome
Resets the Call Home database configuration to its default values.
config [config_name]
Resets the configuration given by [config_name] to the factory default values for
switch, port, and port threshold alarm configuration as described in Table 11
through Table 17. If [config_name] does not exist on the
Switch Module, a
configuration with that name will be created. If you omit [config_name], the active
configuration is reset. You must activate the configuration for the changes to take
effect.
factory
Resets
Switch Module configuration, port configuration, port threshold alarm
configuration, SNMP configuration, system configuration, security configuration,
RADIUS configuration, and
Switch Module services configuration to the factory
default values as described in Table 11 through Table 17. The
Switch Module
configuration is activated automatically.
ipsec
Resets the IP security database configuration to its default values.
port [port_list]
Reinitializes one or more ports given by [port_list]. [port_list] can be a set of port
numbers and ranges delimited by spaces. For example, [0 2 10-15] specifies ports
0, 2, 10, 11, 12, 13, 14, and 15.