H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Profile
59272-00 C 189
The following is an example of the Profile Edit command:
H3C #> admin start
H3C (admin) #> callhome edit
H3C (admin-callhome) #> profile edit profile_1
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Current Values:
Level Alarm
Format ShortText
MaxSize 1000
EmailSubject Switch Problem
RecipientEmail (up to 10 entries allowed)
1. [e-mail]
New Value (press ENTER to accept current value, 'q' to quit):
Level (Alarm,Critical,Warn,None) :
Format (1=FullText, 2=ShortText) : 1
MaxSize (decimal value, 650-100000) :
EmailSubject (string, max=64 chars, N=None) :
RecipientEmail (ex: [e-mail], N=None)
1. [e-mail] :
2. <undefined> :
The profile has been edited.
This configuration must be saved with the 'callhome save' command
before it can take effect, or to discard this configuration
use the 'callhome cancel' command.
H3C (admin-callhome) #> callhome save
The CallHome database profiles will be saved and activated.
Please confirm (y/n): [n] y