H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Line Interface Usage
Downloading and Uploading Files
8 59272-00 C
Downloading and Uploading Files
There are several files that reside on the Switch Module that you can download to
the workstation for examination or for safekeeping. These files include the
following:
 Backup configuration file (configdata)
 Log files (logfile)
 Support files (dump_support.tgz)
You can upload firmware image files or backup configuration files to the Switch
Module to reinstall firmware or restore a corrupted configuration. The Switch
Module uses FTP to exchange files between the Switch Module and the
workstation.
 Refer to “Installing Firmware” on page 4-72 for information about installing
firmware.
 Refer to “Back Up and Restore a Switch Module Configuration” on
page 4-68 for information about backing up and restoring a Switch Module
configuration.
 Refer to “Creating and Downloading a Log File” on page 8-110 for
information about creating a log file.
 Refer to “Creating a Support File” on page 1-6 for information about creating
a support file.
To download a file from the Switch Module to the workstation, do the following:
1. Enter the FTP command and the Switch Module IP address or symbolic
name.
>ftp 192.168.70.129
2. When prompted for a user and password, enter the FTP account name and
password (images, images).
user: images
password: images
3. Set binary mode and use the Get command to download the file
(configdata).
ftp>bin
ftp>get configdata
xxxxx bytes sent in xx secs.
ftp>quit