H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Profile
186 59272-00 C
Profile
Creates and modifies profiles with which to customize Call Home e-mail
notification. A profile defines the event severity level at which to generate e-mails,
e-mail subject and text, and e-mail recipients.
Authority Admin session and a Callhome Edit session. Refer to the “Callhome” command
on page 11-136 for information about starting a Callhome Edit session.
Syntax profile
copy [profile_source] [profile_destination]
create [profile]
del
ete [profile]
edit [profile]
rename [profile_old] [profile_new]
Keywords copy [profile_source] [profile_destination]
Creates a new profile named [profile_destination] and copies the configuration
into it from the profile given by [profile_source]. You must enter the Callhome
Save command afterwards to save your changes.
create [profile]
Creates a profile with the name given by [profile]. A profile name must begin with a
letter and be no longer than 32 characters. Valid characters are 0-9, A-Z, a-z, _, $,
^, and -.You must enter the Callhome Save command afterwards to save your
changes. The Call Home database supports a maximum of 25 profiles. Table 9
describes the profile configuration parameters.
Table 9. Profile Configuration Parameters
Parameter Description
Level Event severity level at which to generate a Call Home e-mail
message:
 None–Generates e-mail messages for all events.
 Warn–Generates e-mail messages for Warning, Critical, and
Alarm events.
 Critical–Generates e-mail messages for Critical and Alarm
events.
 Alarm–Generates e-mail messages for Alarm events only.
Format Level of detail to be included in the e-mail message:
 ShortText–includes switch and event information.
 FullText–includes switch information, event information, Call
Home contact information, and SNMP contact information.