H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Hardreset
162 59272-00 C
Hardreset
Resets the Switch Module and performs a power-on self test. This reset disrupts
I/O traffic, activates the pending firmware, and clears the alarm log. To save the
alarm log before resetting, refer to the “Set Log” command on page 11-210.
Authority Admin session
Syntax hardreset
Notes To reset the Switch Module without a power-on self test, refer to the “Reset”
command on page 11-192.
To reset the
Switch Module without disrupting traffic, refer to the “Hotreset”
command on page 11-165.