H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Fcf
158 59272-00 C
The following is an example of the Fcf Remove Mac command:
H3C #> admin start
H3C (admin) #> config edit
The config named default is being edited.
H3C (admin-config) #> fcf 0efc01 remove mac 0e:fc:00:01:09:99
Mac address 0e:fc:00:01:09:99 has been removed from FCF 0efc01.
This configuration must be saved (see 'config save' command) and
activated (see 'config activate' command) before it can take effect.
To discard this configuration use the 'config cancel' command.
H3C (admin-config) #> config save
H3C (admin) #> config activate
The following is an example of the Fcf Remove Vlan command:
H3C #> admin start
H3C (admin) #> config edit
The config named default is being edited.
H3C (admin-config) #> fcf 0efc01 remove vlan 99
VLAN 99 has been removed from FCF 0efc01.
This configuration must be saved (see 'config save' command) and
activated (see 'config activate' command) before it can take effect.
To discard this configuration use the 'config cancel' command.
H3C (admin-config) #> config save
H3C (admin) #> config activate