H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Fcf
156 59272-00 C
Examples The following is an example of the Fcf List Active command:
H3C (admin) #> fcf list active
Active FCF (FCoE Forwarder) Information
FCF 0efc01
EnforceKeepAliveTimer True
KeepAliveTimer 8
FIPPriority 128
VLAN 1002
MACAddresses None
The following is an example of the Fcf Create command:
H3C #> admin start
H3C (admin) #> config edit
The config named default is being edited.
H3C (admin-config) #> fcf 0efc01 create
A list of attributes with formatting and default values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Default Values:
EnforceKeepAliveTimer True
KeepAliveTimer 8
FIPPriority 128
New Value (press ENTER to accept current value, 'q' to quit):
EnforceKeepAliveTimer (True / False) :
KeepAliveTimer (decimal value, 8-90) :
FIPPriority (decimal value, 0-255) :
The FCF (FCoE Forwarder) has been created.
This configuration must be saved with the 'config save' command
before it can take effect, or to discard this configuration
use the 'config cancel' command.
H3C (admin-config) #> config save
H3C (admin) #> config activate