H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Fcf
59272-00 C 155
 Remove a VLAN from an FCF
add mac [mac_list]
Adds one or more converged network adapter ENODE MAC addresses given by
[mac_list] to the FCF given by [fcf_number].
add vlan [vlan_number]
Adds the VLAN given by [vlan_number] to the FCF given by [fcf_number]. An FCF
can have only one VLAN.
create
Creates an FCF given by [fcf_number]. Additional FCFs can be created only for a
transparent pass-thru module. The FCF parameters are described in Table 6.
delete
Creates the FCF given by [fcf_number]. The default FCF, 0EFC00, cannot be
deleted. To deactivate the default FCF, remove all VLANs from it.
edit
Edits the FCF given by [fcf_number]. The FCF parameters are described in
Table 6.
remove mac [mac_list]
Removes one or more MAC addresses given by [mac_list] from the FCF given by
[fcf_number].
remove vlan [vlan_list]
Removes one or more MAC addresses given by [vlan_list] from the FCF given by
[fcf_number].
Table 6. FCF Parameters
Parameter Description
EnforceKeepAliveTimer Enables (True) or disables (False) support for
FIPv1.
KeepAliveTimer Connection timer index that determines how long to
wait for a response from the host before timing out.
This time period is 2.5 times the index. The default
is 8 seconds.
FIPPriority FIP priority
VLAN VLAN number assigned to the FCF.
MACAddresses MAC addresses assigned to the VLAN number