H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Create
59272-00 C 149
Create
Creates support files for troubleshooting Switch Module problems, and certificates
for secure communications for SMI-S.
Authority Admin session for the Certificate keyword
Syntax create
certificate
support
Keywords certificate
Creates a security certificate on the
Switch Module. The security certificate is
required to establish an SSL connection with a management application such as
SMI-S. The certificate is valid 24 hours before the certificate creation date and
expires 365 days after the creation date. Should the current certificate become
invalid, use the Create Certificate command to create a new one.
support
Assembles all log files and
Switch Module memory data into a file
(dump_support.tgz) on the
Switch Module. If your workstation has an FTP server,
you can proceed with the command prompts to send the file from the
Switch
Module
to a remote host. Otherwise, you can use FTP to download the support file
from the
Switch Module to your workstation. The support file is useful to technical
support personnel for troubleshooting
Switch Module problems. Use this command
when directed by your authorized maintenance provider. This keyword does not
require an Admin session.
f
NOTE:
To insure the creation of a valid certificate, be sure that the
Switch Module
and the workstation time and date are the same. Refer to the following:
 “Date” command on page 11-152 for information about setting the time
and date
 “Set Timezone” command on page 11-244 for information about setting
the time zone on the
Switch Module and workstation
 “Set Setup System” command on page 11-233 (System keyword) for
information about enabling the Network Time Protocol for synchronizing
the time and date on the
Switch Module and workstation from an NTP
server.