H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Config
59272-00 C 147
save [config_name]
Saves changes made during a configuration edit session in the configuration
given by [config_name]. If you omit [config_name], the value for [config_name]
you chose for the most recent Config Edit command is used. [config_name] can
be up to 31 characters excluding #, semicolon (;), and comma (,). The module
supports up to 10 configurations including the default configuration.
Notes Changes you make to an active or inactive configuration can be saved, but will not
take effect until you activate that configuration.
Examples The following shows an example of how to open and close a Config Edit session:
H3C #> admin start
H3C (admin) #> config edit
The config named default is being edited.
.
.
H3C (admin-config) #> config cancel
Configuration mode will be canceled. Please confirm (y/n): [n] y
H3C (admin) #> admin end
The following is an example of how to create a backup file (configdata) and
download the file to the workstation.
H3C #> config backup
H3C #> exit
#>ftp symbolic_name or ip_address
user: images
password: images
ftp> bin
ftp> get configdata
ftp> quit