H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Config
59272-00 C 145
Config
Manages the Fibre Channel configurations on a Switch Module. For information
about setting the port and
Switch Module configurations, refer to the
“Set Config Switch” command on page 11-206.
Authority Admin session for all keywords except Backup and List
Syntax config
act
ivate [config_name]
backup [export]
cancel
copy [config_source] [config_destination]
del
ete [config_name]
edit [config_name]
export [account_name] [ip_address] [file_name]
import [account_name] [ip_address] [file_name]
list
restore
save [config_name]
Keywords activate [config_name]
Activates the configuration given by [config_name]. If you omit [config_name], the
currently active configuration is used. Only one configuration can be active at a
time.
backup [export]
Creates a file named configdata, which contains the system configuration
information. This keyword does not require an Admin session. Configuration
backup files are deleted from the switch during a power cycle or switch reset.
The optional Export keyword creates the configuration backup file and exports it to
a remote server prompting you for the server, an account name, the server IP
address or DNS host name, destination file name, and a password if the server
requires one.
cancel
Terminates the current configuration edit session without saving changes that
were made.
copy [config_source] [config_destination]
Copies the configuration given by [config_source] to the configuration given by
[config_destination]. The
Switch Module supports up to 10 configurations including
the default configuration.