H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Command Reference
Clone Config Port
144 59272-00 C
Clone Config Port
Configures one or more ports based on a source port.
Authority Admin session and a Config Edit session
Syntax clone config port [source_port_number] [port_list]
Keywords port [source_port_number] [port_list]
Configures a list of ports given by [port_list] based on the port given by
[source_port_number]. [source_port_number] can be 0–7. [port_list] can be a list
of port numbers or ranges delimited by spaces. Both the source port and the
[port_list] must be either all external ports or all internal ports.
Notes Refer to Table 18 for a description of the port configuration parameters.
Examples The following example configures ports 1–3 based on port 0.
H3C #> admin start
H3C (admin) #> config edit
H3C (admin) #> clone config port 0 1-3
H3C (admin-config) #> config save
The config named default has been saved.
H3C (admin) #> config activate
The currently active configuration will be activated.
Please confirm (y/n): [n] y